SHIFT LEVER > REMOVAL |
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
Move the shift lever to N.
![]() |
Remove the shift lever knob sub-assembly.
| 2. REMOVE REAR CONSOLE BOX ASSEMBLY |
| 3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Disconnect the cable end from the shift lever assembly.
![]() |
Rotate the nut approximately 180° in the direction shown in the illustration, and while holding the nut, disconnect the transmission control cable assembly from the shift lever plate.
| *1 | Nut |
| *a | Rotate Approximately 180° |
| *b | Disconnect |
| 4. REMOVE SHIFT LEVER ASSEMBLY |
![]() |
Disconnect the 2 connectors from the shift lever assembly.
Disengage the 2 clamps and separate the instrument panel wire from the shift lever assembly.
![]() |
Remove the 4 bolts and shift lever assembly.