Home › Drivetrain › P510 HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > DISASSEMBLY

for Preparation Click here



1. REMOVE POSITION INDICATOR HOUSING


    C258112
  1. Disengage the 4 claws and remove the position indicator housing from the lower position indicator housing.

    NOTICE:
    Do not damage the lower position indicator housing.



2. REMOVE NO. 2 CONTROL POSITION INDICATOR PLATE


    C249914
  1. Disengage the claw and remove the No. 2 control position indicator plate from the position indicator housing.



3. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    C258117
  1. Disconnect the indicator light wire sub-assembly from the lower position indicator housing.



    C249917
  1. Disengage the 4 clamps and disconnect the indicator light wire sub-assembly from the lower shift lever assembly.



4. REMOVE POSITION INDICATOR SLIDE COVER


    C249919
  1. Remove the position indicator slide cover from the lower position indicator housing.



5. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER


    C235350
  1. Align the cutouts on the shank of the No. 2 position indicator slide cover and the position indicator slide cover, and remove the No. 2 position indicator slide cover from the position indicator slide cover.



6. REMOVE LOWER POSITION INDICATOR HOUSING


    C249920
  1. Disengage the 4 claws and remove the lower position indicator housing from the lower shift lever assembly.