Home › Drivetrain › P510 HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REASSEMBLY

for Preparation Click here



1. INSTALL LOWER POSITION INDICATOR HOUSING


    C249920
  1. Engage the 4 claws and install the lower position indicator housing to the lower shift lever assembly.



2. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER
  1. Align the cutouts on the shank of the No. 2 position indicator slide cover and the position indicator slide cover, and install the No. 2 position indicator slide cover to the position indicator slide cover.



3. INSTALL POSITION INDICATOR SLIDE COVER


    C249919E01
  1. Install the position indicator slide cover to the lower position indicator housing.
    Text in Illustration 
    *a
    Arrow

    NOTICE:
    Install the position indicator slide cover so that its arrow mark points to the front of the vehicle.



4. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY


    C249917
  1. Engage the 4 clamps and connect the indicator light wire sub-assembly to the lower shift lever assembly.



    C258113
  1. Install the indicator light wire sub-assembly to the lower position indicator housing.



5. INSTALL NO. 2 CONTROL POSITION INDICATOR PLATE


    C249914
  1. Engage the claw and install the No. 2 control position indicator plate to the position indicator housing.



6. INSTALL POSITION INDICATOR HOUSING


    C258112
  1. Engage the 4 claws and install the position indicator housing to the lower position indicator housing.