Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Bench Type Seatback)

REAR SEAT ASSEMBLY (for Bench Type Seatback) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT CUSHION LOCK HOOK


    B296148
  1. Engage the 2 claws to install the rear seat cushion lock hook as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and the LH side.



2. INSTALL REAR SEAT CUSHION ASSEMBLY
  1. Place the rear seat cushion assembly in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.



    B296199
  1. Push out the seat belt buckles from the back of the rear seat cushion assembly so that they are positioned as shown in the illustration.



    B392248E01
  1. Engage the hook of the rear seat cushion assembly to the CRS anchor bracket.
    Text in Illustration 
    *a
    Hook



    B296116
  1. Engage the 2 rear seat cushion lock hooks to install the rear seat cushion assembly as shown in the illustration.

  1. Confirm that the seat cushion is firmly installed.

    NOTICE:
    When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.

  1. Engage the 2 clips.



3. INSTALL REAR SEATBACK ASSEMBLY
  1. Place the rear seatback assembly in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Install the rear seatback assembly with the 2 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Raise the rear seatback assembly.



4. INSTALL FRONT CENTER FLOOR COVER
  1. Engage the 2 guides to install the front center floor cover.

  1. Install the 3 clips.



5. INSTALL FRONT FLOOR COVER LH
  1. Engage the 3 guides.



    B301490E01
  1. Engage the clip <B> to install the front floor cover LH.

  1. Install the 2 clips <A>.



6. INSTALL FRONT FLOOR COVER RH
  1. Engage the 3 guides.



    B301488E01
  1. Engage the clip <B> to install the front floor cover RH.

  1. Install the 2 clips <A>.



7. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY


8. INSTALL REAR SEAT HEADREST ASSEMBLY