FRONT SEAT OUTER BELT ASSEMBLY > REMOVAL |
| 1. PRECAUTION |
| 2. REMOVE FRONT FLOOR COVER RH |
![]() |
Using a clip remover, remove the 2 clips <A>.
Disengage the 3 clips <B>.
![]() |
Disengage the 3 guides and remove the front floor cover RH.
| 3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL |
| 4. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Disengage the 8 claws and remove the front door scuff plate LH.
| 5. REMOVE FRONT FLOOR COVER LH (for LH Side) |
![]() |
Using a clip remover, remove the 2 clips <A>.
Disengage the 3 clips <B>.
![]() |
Disengage the 3 guides and remove the front floor cover LH.
| 6. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 5 claws and guide and remove the rear door scuff plate LH.
| 7. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
Remove the front door opening trim weatherstrip LH.
| 8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
Remove the rear door opening trim weatherstrip LH.
| 9. REMOVE LAP BELT OUTER ANCHOR COVER |
![]() |
Disengage the 3 claws and remove the lap belt outer anchor cover.
| 10. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt and disconnect the floor anchor of the front seat outer belt assembly.
| 11. REMOVE CENTER PILLAR LOWER GARNISH |
![]() |
Disengage the 4 claws and 2 clips, and remove the center pillar lower garnish LH.
| 12. REMOVE CENTER PILLAR UPPER GARNISH |
![]() |
Remove the 2 screws and disengage the clip.
Pass the floor anchor of the front seat outer seat belt assembly LH through the center pillar upper garnish LH and remove the center pillar upper garnish LH.
| 13. REMOVE FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt and the disconnect the shoulder anchor of the front seat outer belt assembly.
![]() |
Using a screwdriver, pull out the locking button in the direction shown by the arrow in the illustration to release the lock, and disconnect the pretensioner connector as shown in the illustration.
| *1 | Protective Tape |
Disconnect the pretensioner connector.
![]() |
Remove the 2 bolts.
Disengage the 2 hooks and remove the front seat outer belt assembly.