DTC No.
| DTC Detection Condition
| Trouble Area
|
U0100
| When IG voltage is 9.5 V or more and the following condition is detected:
- No communication with ECM or hybrid vehicle control ECU continues for 2 seconds or more
| - ECM
- Hybrid vehicle control ECU
- CAN communication system
- Combination meter assembly
|
U0129
| When IG voltage is 9.5 V or more and the following condition is detected:
- No communication with brake booster with master cylinder assembly (skid control ECU) continues for 2 seconds or more
| - Brake booster with master cylinder assembly (Skid control ECU)
- CAN communication system
- Combination meter assembly
|
U0131
| When IG voltage is 9.5 V or more and the following condition is detected:
- No communication with power steering ECU assembly continues for 3 seconds or more
| - Power steering ECU assembly
- CAN communication system
- Combination meter assembly
|
U0142
| When IG voltage is 9.5 V or more and the following condition is detected:
- No communication with main body ECU (multiplex network body ECU) continues for 3 seconds or more
| - Main body ECU (Multiplex network body ECU)
- CAN communication system
- Combination meter assembly
|
U0151
| When IG voltage is 9.5 V or more and the following condition is detected:
- No communication with airbag sensor assembly continues for 10 seconds or more
| - Airbag sensor assembly
- CAN communication system
- Combination meter assembly
|