Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO RECEIVER ASSEMBLY


2. INSTALL NO. 1 RADIO BRACKET
  1. Install the No. 1 radio bracket with the 3 screws.



3. INSTALL NO. 2 RADIO BRACKET
  1. Install the No. 2 radio bracket with the 3 screws.



4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
  1. Connect each connector.

  1. Engage the 2 guides to the vehicle body to temporarily install the radio receiver assembly with bracket.

  1. Install the radio receiver assembly with bracket with the 4 screws.



5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B301682
  1. Engage the claw and 8 clips to install the center instrument cluster finish panel sub-assembly.