Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



OVERALL CAN BUS DIAGRAM (for LHD)


  1. The CAN communication system is composed of 2 buses.


    C260940E01


    Text in Illustration 
    *1
    V Bus
    *2
    Sub Bus 15
    *3
    V Bus Terminating Resistor
    *4
    Sub Bus 15 Terminating Resistor
    *5
    ECM
    (for V Bus and Sub Bus 15)
    *6
    Main Body ECU (Multiplex Network Body ECU)
    (for V Bus)
    *7
    Airbag Sensor Assembly
    (for V Bus)
    *8
    Spiral Cable with Sensor Sub-assembly (Steering Sensor)
    (for V Bus)
    *9
    Power Steering ECU Assembly
    (for V Bus)
    *10
    Air Conditioning Amplifier Assembly
    (for V Bus)
    *11
    Hybrid Vehicle Control Computer Assembly
    (for V Bus and Sub Bus 15)
    *12
    Smart Key ECU Assembly (Certification ECU)
    (for V Bus)
    *13
    Brake Booster with Master Cylinder Assembly (Skid Control ECU)
    (for V Bus and Sub Bus 15)
    *14
    DLC3
    (for V Bus)
    *15
    Combination Meter Assembly
    (for V Bus)
    -
    -

HINT:
Refer to the following bus wiring diagrams for details.


V BUS (for LHD)

C260941E02


C251131E08

HINT:
The CAN communication system connects to other networks via ECUs that function as a gateway (Click here).


OVERALL CAN BUS DIAGRAM (for RHD)


  1. The CAN communication system is composed of 2 buses.


    C260940E01


    Text in Illustration 
    *1
    V Bus
    *2
    Sub Bus 15
    *3
    V Bus Terminating Resistor
    *4
    Sub Bus 15 Terminating Resistor
    *5
    ECM
    (for V Bus and Sub Bus 15)
    *6
    Main Body ECU (Multiplex Network Body ECU)
    (for V Bus)
    *7
    Airbag Sensor Assembly
    (for V Bus)
    *8
    Spiral Cable with Sensor Sub-assembly (Steering Sensor)
    (for V Bus)
    *9
    Power Steering ECU Assembly
    (for V Bus)
    *10
    Air Conditioning Amplifier Assembly
    (for V Bus)
    *11
    Hybrid Vehicle Control Computer Assembly
    (for V Bus and Sub Bus 15)
    *12
    Smart Key ECU Assembly (Certification ECU)
    (for V Bus)
    *13
    Brake Booster with Master Cylinder Assembly (Skid Control ECU)
    (for V Bus and Sub Bus 15)
    *14
    DLC3
    (for V Bus)
    *15
    Combination Meter Assembly
    (for V Bus)
    -
    -

HINT:
Refer to the following bus wiring diagrams for details.


V BUS (for RHD)

C260942E02


C260943E05

HINT:
The CAN communication system connects to other networks via ECUs that function as a gateway (Click here).


SUB BUS 15

C322427E01