Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE (for Rear Side)

WASHER NOZZLE (for Rear Side) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT REAR WASHER NOZZLE


  1. Operate the rear washer nozzle and check the position that the washer fluid hits the windshield.

    Standard:
    Washer fluid hits the windshield in the area shown in the illustration.



    E246656E01


    Text in Illustration 
    *a
    Measurement
    -
    -

    Standard Clearance:

    Area
    Measurement
    Area
    Measurement
    A
    138.4 mm (5.45 in.)
    B
    130.7 mm (5.15 in.)
    C
    60.3 mm (2.37 in.)
    D
    191 mm (7.52 in.)