Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER

DOOR CONTROL TRANSMITTER > REMOVAL

for Preparation Click here



1. REMOVE TRANSMITTER BATTERY

NOTICE:
Take extra care when handling these precision electronic components.



    B279472
  1. Push the release hook knob and extract the mechanical key as shown in the illustration.



    B279473E01
  1. Insert a screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



    B279474E01
  1. Insert a precision screwdriver into the gap and remove the transmitter battery (lithium battery: CR1632).
    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the transmitter battery. The terminals may be damaged.
    3. Do not touch the transmitter battery with wet hands. Water may cause rust.
    4. Do not touch or move any components inside the transmitter. It may interfere with proper operation.
    5. To prevent the transmitter from being damaged, be sure to touch a grounded metal surface with your bare hands to discharge any static electricity before replacing the transmitter battery.

    HINT:
    Tape the screwdriver tip before use.