FRONT BUMPER > DISASSEMBLY |
| 1. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET |
![]() |
Remove the 2 screws.
Disengage the 2 claws to remove the front bumper extension mounting bracket.
| 2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH |
![]() |
Remove the 3 screws to remove the front turn signal light assembly.
| 3. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY RH |
| 4. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
![]() |
Remove the screw.
Disengage the 2 guides and remove the fog light assembly.
| 5. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
| 6. REMOVE FOG LIGHT COVER LH |
![]() |
Disengage the 4 claws to remove the fog light cover LH.
| 7. REMOVE FOG LIGHT COVER RH |
| 8. REMOVE HOOD TO FRONT END PANEL SEAL |
![]() |
Remove the 3 clips and hood to front end panel seal.
| *a | Double-sided Tape |
| 9. REMOVE UPPER FRONT BUMPER RETAINER |
![]() |
Remove the 4 clips and upper front bumper retainer.
| 10. REMOVE RADIATOR GRILLE |
![]() |
Disengage the 11 claws to remove the radiator grille.
| 11. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
![]() |
Remove the 2 screws.
Disengage the 4 claws and 2 guides to remove the radiator grill (or front panel) emblem.
| 12. REMOVE LOWER NO. 1 RADIATOR GRILLE |
Disengage the 13 claws to remove the lower No. 1 radiator grille.

| 13. REMOVE NO. 2 RADIATOR GRILLE MOULDING |
![]() |
Disengage the 2 claws.
| *a | Hook |
Disengage the hook to remove the No. 2 radiator grille moulding.
| 14. REMOVE FRONT BUMPER HOLE COVER |
![]() |
Disengage the 2 claws and guide.
| *a | Hook |
Disengage the hook to remove the front bumper hole cover.
| 15. REMOVE RADIATOR GRILLE GARNISH |
![]() |
Remove the 2 screws.
Disengage the 23 claws and 2 guides to remove the radiator grill garnish.

| 16. REMOVE FRONT BUMPER SIDE RETAINER LH |
![]() |
Remove the bolt.
![]() |
Disengage the 2 claws to remove the front bumper side retainer LH.
| 17. REMOVE FRONT BUMPER SIDE RETAINER RH |
| 18. REMOVE RADIATOR SUPPORT OPENING COVER |
![]() |
Remove the 4 clips and radiator support opening cover.
| 19. REMOVE NO. 2 RADIATOR SIDE AIR SEAL |
![]() |
Disengage the 2 claws and remove the No. 2 radiator side air seal.
| 20. REMOVE NO. 1 RADIATOR SIDE AIR SEAL |
![]() |
Disengage the 2 claws and remove the No. 1 radiator side air seal.
| 21. REMOVE RADIATOR SUPPORT EXTENSION LH |
![]() |
Disengage the 2 clamps and disconnect the thermistor assembly.
Disengage the 2 claws and remove the radiator support extension LH.
| 22. REMOVE RADIATOR SUPPORT EXTENSION RH |
![]() |
Disengage the 2 claws and remove the radiator support extension RH.
| 23. REMOVE FRONT BUMPER ENERGY ABSORBER |
![]() |
Disengage the 2 guides to remove the front bumper energy absorber.
| 24. REMOVE FRONT BUMPER REINFORCEMENT |
![]() |
Disengage the 2 clamps and disconnect the wire harness.
Remove the 6 bolts and front bumper reinforcement.