Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR BUMPER SIDE RETAINER LH


    B297206
  1. Remove the screw.

  1. Disengage the 2 claws and guide and remove the rear bumper side retainer LH.



2. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



3. REMOVE UPPER REAR BUMPER RETAINER LH


    B307358
  1. Remove the screw.

  1. Disengage the 2 claws and remove the upper rear bumper retainer LH.



4. REMOVE UPPER REAR BUMPER RETAINER RH

HINT:
Use the same procedure as for the LH side.



5. REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH (w/o Reinforcement)


    B391915
  1. Remove the 3 bolts and rear bumper arm sub-assembly LH.



6. REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH (w/o Reinforcement)

HINT:
Use the same procedure as for the LH side.



7. REMOVE NO. 1 REAR BUMPER REINFORCEMENT (w/ Reinforcement)


    B391916
  1. Remove the 4 bolts and No. 1 rear bumper reinforcement.



8. REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH (w/ Reinforcement)


    B391917
  1. Remove the 3 bolts and rear bumper arm sub-assembly LH.



9. REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH (w/ Reinforcement)

HINT:
Use the same procedure as for the LH side.



10. REMOVE REAR BUMPER SIDE SEAL LH


    B391918
  1. Remove the 2 clips and rear bumper side seal LH.



11. REMOVE REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure as for the LH side.