REAR BUMPER > REASSEMBLY |
| 1. INSTALL REAR BUMPER SIDE SEAL LH |
![]() |
Install the rear bumper side seal LH with the 2 clips.
| 2. INSTALL REAR BUMPER SIDE SEAL RH |
| 3. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH (w/o Reinforcement) |
![]() |
Install the rear bumper arm sub-assembly LH with the 3 bolts.
| 4. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH (w/o Reinforcement) |
| 5. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH (w/ Reinforcement) |
![]() |
Install the rear bumper arm sub-assembly LH with the 3 bolts.
| 6. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH (w/ Reinforcement) |
| 7. INSTALL NO. 1 REAR BUMPER REINFORCEMENT (w/ Reinforcement) |
![]() |
Install the No. 1 rear bumper reinforcement with the 4 bolts.
| 8. INSTALL UPPER REAR BUMPER RETAINER LH |
![]() |
Engage the 2 claws and install the upper rear bumper retainer LH.
Install the screw.
| 9. INSTALL UPPER REAR BUMPER RETAINER RH |
| 10. INSTALL REAR BUMPER SIDE RETAINER LH |
![]() |
Engage the guide and 2 claws and install the rear bumper side retainer LH.
Install the screw.
| 11. INSTALL REAR BUMPER SIDE RETAINER RH |