Home › Brake › BRAKE (REAR) › REAR BRAKE

REAR BRAKE > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR WHEEL CYLINDER KIT


    C124866E01
  1. Remove the 2 wheel cylinder boots from the rear wheel brake cylinder assembly.
    Text in Illustration 
    *1
    Cylinder Boot
    *2
    Piston
    *3
    Wheel Cylinder Cup
    *4
    Rear Wheel Brake Cylinder Compression Spring

  1. Remove the 2 pistons.

  1. Remove the wheel cylinder cup from each piston.

  1. Remove the rear wheel brake cylinder compression spring from the rear brake wheel cylinder assembly.