POWER WINDOW REGULATOR MOTOR (for Front Door) > INSPECTION |
| 1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (w/ Jam Protection Function) |
![]() |
Apply positive (+) auxiliary battery voltage to connector terminal 2 (B).
Connect a ground lead to connector terminals 1 (GND) and 7 (DOWN) or 10 (UP).
Check that the motor gear rotates smoothly as follows:
| Measurement Condition | Specified Condition |
| Motor gear rotates clockwise |
| Motor gear rotates counterclockwise |
| *a | Component without harness connected (Power Window Regulator Motor Assembly LH) |
| *b | Counterclockwise |
| *c | Clockwise |
| 2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (w/o Jam Protection Function) |
![]() |
Apply auxiliary battery voltage to the motor connector according to the table below.
| Measurement Condition | Specified Condition |
| Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 | Motor gear rotates clockwise |
| Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 | Motor gear rotates counterclockwise |
| *a | Component without harness connected (Power Window Regulator Motor Assembly LH) |
| *b | Motor Gear |
| *c | Counterclockwise |
| *d | Clockwise |
| 3. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (w/ Jam Protection Function) |
![]() |
Apply positive (+) auxiliary battery voltage to connector terminal 2 (B).
Connect a ground lead to connector terminals 1 (GND) and 7 (DOWN) or 10 (UP).
Check that the motor gear rotates smoothly as follows:
| Measurement Condition | Specified Condition |
| Motor gear rotates counterclockwise |
| Motor gear rotates clockwise |
| *a | Component without harness connected (Power Window Regulator Motor Assembly RH) |
| *b | Clockwise |
| *c | Counterclockwise |
| 4. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (w/o Jam Protection Function) |
![]() |
Apply auxiliary battery voltage to the motor connector according to the table below.
| Measurement Condition | Specified Condition |
| Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 | Motor gear rotates clockwise |
| Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 | Motor gear rotates counterclockwise |
| *a | Component without harness connected (Power Window Regulator Motor Assembly RH) |
| *b | Motor Gear |
| *c | Clockwise |
| *d | Counterclockwise |