Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM

DTC    B279C    Theft Deterrent System Presence Detection

for Preparation Click here


DESCRIPTION

This code is stored when a hybrid vehicle control ECU that is incompatible with the engine immobiliser system is installed to the vehicle.

DTC Code
DTC Detection Condition
Trouble Area
DTC Output Confirmation Operation
B279C
A hybrid vehicle control ECU that is incompatible with the engine immobiliser system is installed (1 trip detection logic*).
Hybrid vehicle control ECU
Check for DTCs.
  1. *: Only output while a malfunction is present.

Vehicle Condition and Fail-safe Operation when Malfunction Detected 
Vehicle Condition when Malfunction Detected
Fail-safe Operation when Malfunction Detected
Hybrid control system cannot be started
-

Related Data List and Active Test 
DTC Code
Data List and Active Test
B279C
-

INSPECTION PROCEDURE

NOTICE:
Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.

1.REPLACE CURRENT HYBRID VEHICLE CONTROL ECU WITH PROPER HYBRID VEHICLE CONTROL ECU
  1. Replace the current hybrid vehicle control ECU with the proper hybrid vehicle control ECU (Click here).


NEXT

END