Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    C251697
  1. Remove the 3 bolts and No. 1 console box mounting bracket.



3. REMOVE NO. 3 CONSOLE BOX MOUNTING BRACKET


    C251698
  1. Remove the bolt and No. 3 console box mounting bracket.



4. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY


    C247540E01
  1. Loosen the lock nut.
    Text in Illustration 
    *1
    Lock Nut

    NOTICE:
    If the lock nut has been removed from the rod, replace the lock nut with a new one.



    C268394
  1. Disengage the 2 claws to remove the parking brake cable stopper.



    C268395E01
  1. Separate the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly from the parking brake equalizer.
    Text in Illustration 
    *1
    Parking Brake Equalizer
    *2
    No. 2 Parking Brake Cable Assembly
    *3
    No. 3 Parking Brake Cable Assembly



    C247542
  1. Disconnect the parking brake switch connector.



    C247543
  1. Remove the 2 bolts and parking brake lever sub-assembly.



5. REMOVE PARKING BRAKE SWITCH ASSEMBLY


    C247544
  1. Remove the screw and parking brake switch assembly.