Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for RHD)

BRAKE PEDAL (for RHD) > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE PEDAL PAD
  1. Install the brake pedal pad to the brake pedal support assembly.



2. INSTALL BRAKE PEDAL SHAFT COLLAR
  1. Install the brake pedal shaft collar to the brake pedal sub-assembly.



3. INSTALL BRAKE PEDAL BUSHING


    C247878
  1. Apply lithium soap base glycol grease to 2 new brake pedal bushings.
    Text in Illustration 
    V100145
    Lithium Soap Base Glycol Grease

  1. Install the 2 brake pedal bushings to the brake pedal sub-assembly.



4. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    C249832
  1. Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

    NOTICE:
    Install the bolt and nut in the correct direction.