Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for LHD)

BRAKE PEDAL (for LHD) > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE PEDAL PAD


2. INSTALL BRAKE PEDAL SHAFT COLLAR
  1. Install the brake pedal shaft collar to the brake pedal sub-assembly.



3. INSTALL BRAKE PEDAL BUSHING


    C247878
  1. Apply lithium soap base glycol grease to 2 new brake pedal bushings.
    Text in Illustration 
    V100145
    Lithium Soap Base Glycol Grease

  1. Install the 2 brake pedal bushings to the brake pedal sub-assembly.



4. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    C250005
  1. Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

    NOTICE:
    Install the bolt and nut in the correct direction.