REAR WIPER MOTOR > REMOVAL |
| 1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY |
![]() |
Remove the 10 clips and back door trim board assembly.
| 2. REMOVE BACK DOOR TRIM COVER |
![]() |
Disengage the 5 clips and back door trim cover.
| 3. REMOVE REAR WIPER ARM HEAD CAP |
![]() |
Disengage the 2 claws and open the rear wiper arm head cap as shown in the illustration.
Disengage the 2 guides and remove the rear wiper arm head cap.
| 4. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY |
![]() |
Remove the nut and rear wiper arm and blade assembly.
| 5. REMOVE REAR WIPER MOTOR GROMMET |
![]() |
Remove the rear wiper motor grommet.
| 6. REMOVE REAR WIPER MOTOR ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 bolts and rear wiper motor assembly.