Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > REMOVAL

for Preparation Click here



1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    B307129
  1. Disengage the 8 claws and 3 guides.

  1. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.



2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B296735
  1. Disengage the 2 claws and remove the rear power window regulator switch assembly from the rear upper door armrest base panel.