Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Rear Side)

WASHER MOTOR (for Rear Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR WASHER JAR BUSH
  1. Install the rear washer jar bush to the washer jar.



2. INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY


    E237562
  1. Install the rear washer motor and pump assembly.

  1. Connect the connector.

  1. Connect the washer hose.



3. ADD WINDSHIELD WASHER FLUID
  1. Add windshield washer fluid to the windshield washer jar.



4. INSTALL FRONT FENDER LINER RH
  1. Install the front fender liner RH with 5 new grommets.

  1. Install the 7 clips.

  1. Install the 4 screws.



5. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
  1. Install the 2 screws and front wheel opening extension pad RH.



6. INSTALL FRONT WHEEL RH

Torque:
103 N*m{ 1050 kgf*cm , 76 ft.*lbf }