Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Front Side)

WASHER MOTOR (for Front Side) > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WASHER JAR BUSH
  1. Install the windshield washer jar bush to the washer jar.



2. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E237558
  1. Install the windshield washer motor and pump assembly.

  1. Connect the connector.

  1. Connect the washer hose.



3. ADD WINDSHIELD WASHER FLUID
  1. Add washer fluid to the washer jar.



4. INSTALL FRONT FENDER LINER RH
  1. Install the front fender liner RH with 4 new grommets.

  1. Install the 7 clips

  1. Install the 3 screws and front fender liner RH.



5. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
  1. Install the 2 screws and front wheel opening extension pad RH.



6. INSTALL FRONT WHEEL RH

Torque:
103 N*m{ 1050 kgf*cm , 76 ft.*lbf }