WASHER MOTOR (for Front Side) > REMOVAL |
| 1. REMOVE FRONT WHEEL RH |
| 2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH |
![]() |
Remove the 2 screws and front wheel opening extension pad RH.
| 3. REMOVE FRONT FENDER LINER RH |
![]() |
Remove the 3 screws.
![]() |
Remove the 4 grommets.
![]() |
Remove the 7clips and front fender liner RH.
| 4. DRAIN WINDSHIELD WASHER FLUID |
![]() |
Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
| 5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() |
Disconnect the connector.
Remove the windshield washer motor and pump assembly as shown in the illustration.
| 6. REMOVE WINDSHIELD WASHER JAR BUSH |
![]() |
Remove the windshield washer jar bush from the windshield washer jar.