Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Front Side)

WASHER MOTOR (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL RH


2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    E307869
  1. Remove the 2 screws and front wheel opening extension pad RH.



3. REMOVE FRONT FENDER LINER RH


    E307874
  1. Remove the 4 screws.



    E307875
  1. Remove the 5 grommets.



    E307876
  1. Remove the 7 clips and front fender liner RH.



4. DRAIN WINDSHIELD WASHER FLUID


    E308439
  1. Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.

    HINT:
    Use a container to collect the windshield washer fluid.



5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E308440
  1. Disconnect the connector.

  1. Remove the windshield washer motor and pump assembly as shown in the illustration.



6. REMOVE WINDSHIELD WASHER JAR BUSH


    E308441
  1. Remove the windshield washer jar bush from the windshield washer jar.