POWER OUTLET SOCKET > INSTALLATION |
| 1. INSTALL NO. 1 POWER OUTLET SOCKET COVER |
![]() |
Align the protrusion of the No. 1 power outlet socket cover with the cutout of the lower instrument panel.
Engage the 2 claws and install the No. 1 power outlet socket cover.
| 2. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Align the protrusion of the No. 1 power outlet socket assembly with the cutout of the No. 1 power outlet socket cover and install the No. 1 power outlet socket.
![]() |
Turn the No. 1 power outlet socket assembly counterclockwise and securely engage the claw.
Connect the connector.
| 3. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver) |
Install the radio tuner opening cover with bracket with the 4 screws <C>.
| 4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver) |
Connect each connector.
Engage the 2 guides to the vehicle body to temporarily install the radio receiver assembly with bracket.
Install the radio receiver assembly with bracket with the 4 screws.
| 5. INSTALL AIR CONDITIONER CONTROL ASSEMBLY |