Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER SWITCH

HEADLIGHT CLEANER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY
  1. Engage the 2 claws to install the headlight cleaner switch assembly.



2. INSTALL NO. 1 SWITCH HOLE BASE


  1. for LHD:

    1. Connect each connector.



    2. B307670
    3. Engage the 4 claws and 2 clips to install the No. 1 switch hole base.

  1. for RHD:

    1. Connect each connector.

    2. Engage the 2 claws and 3 clips to install the No. 1 switch hole base.



3. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY
(Click here)