Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER SWITCH

HEADLIGHT CLEANER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY
(Click here)


2. REMOVE NO. 1 SWITCH HOLE BASE


  1. for LHD:



      B307669
    1. Disengage the 4 claws and 2 clips as shown in the illustration.

    2. Disconnect each connector and remove the No. 1 switch hole base.



  1. for RHD:



      B297481
    1. Disengage the 2 claws and 3 clips.

    2. Disconnect each connector and remove the No. 1 switch hole base.



3. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY


    E237731
  1. Disengage the 2 claws and remove the headlight cleaner switch assembly.