Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > INSPECTION

for Preparation Click here



1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH


  1. Check the switch function.



      B164433E21
    1. Measure the resistance when the switch is operated according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 (D) - 2 (SD)
      UP
      Below 1 Ω
      3 (B) - 4 (U)
      UP
      Below 1 Ω
      1 (D) - 2 (SD)
      off
      Below 1 Ω
      4 (U) - 5 (SU)
      off
      Below 1 Ω
      4 (U) - 5 (SU)
      DOWN
      Below 1 Ω
      1 (D) - 3 (B)
      DOWN
      Below 1 Ω

      Text in Illustration 
      *a
      Component without harness connected
      (Power Window Regulator Switch Assembly (for Rear LH Door))
      If the result is not as specified, replace the power window regulator switch assembly (for rear LH door).



2. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH


  1. Check the switch function.



      B164433E21
    1. Measure the resistance when the switch is operated according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 (D) - 2 (SD)
      UP
      Below 1 Ω
      3 (B) - 4 (U)
      UP
      Below 1 Ω
      1 (D) - 2 (SD)
      off
      Below 1 Ω
      4 (U) - 5 (SU)
      off
      Below 1 Ω
      4 (U) - 5 (SU)
      DOWN
      Below 1 Ω
      1 (D) - 3 (B)
      DOWN
      Below 1 Ω

      Text in Illustration 
      *a
      Component without harness connected
      (Power Window Regulator Switch Assembly (for Rear RH Door))
      If the result is not as specified, replace the power window regulator switch assembly (for rear RH door).