Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL MAP LIGHT BULB
  1. Install the 2 map light bulbs to the map light assembly.



2. INSTALL OUTER ROOM LIGHT LENS
  1. Engage the 6 claws to install the outer room light lens.



3. INSTALL MAP LIGHT ASSEMBLY
  1. Connect the connector.



    E236389E01
  1. Engage the 4 claws to install the map light assembly.
    Text in Illustration 
    *a
    Contact Portion

    NOTICE:
    Do not touch the metal plates, especially the contact portions, as it may cause a malfunction such as the light does not illuminate.