REAR COMBINATION LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY |
Engage the grommet.
![]() |
Engage the guide and 2 pins to temporarily install the rear combination light assembly.
| *1 | Pin |
| *2 | Guide |
| *3 | Rear Combination Light Guide |
| *4 | No. 2 Rear Combination Light Guide |
Install the rear combination light assembly with the 2 bolts.
Pull the deck trim side panel assembly until the connector of the rear combination light assembly can be seen.
Connect the connector.
Engage the 2 clips to install the deck trim side panel assembly.
Install the bolt.