Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM

DTC    P060B-134    Internal Control Module A/D Processing Performance

DTC    P060B-135    Internal Control Module A/D Processing Performance

DTC    P060B-570    Internal Control Module A/D Processing Performance

DTC    P062F-143    Internal Control Module EEPROM Error

for Preparation Click here


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation and it will set this DTC when it detects an internal malfunction. If this DTC is output, replace the hybrid vehicle control ECU.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P060B
134
ECU internal error
Hybrid vehicle control ECU
135
570
P062F
143

INSPECTION PROCEDURE

HINT:
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
  1. Turn the power switch off and wait for 30 seconds or more.
  2. Turn the power switch on (IG) and wait for 15 seconds or more.

1.REPLACE HYBRID VEHICLE CONTROL ECU
(Click here)

NEXT

COMPLETED