Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA

TELEVISION CAMERA > INSTALLATION

for Preparation Click here



1. INSTALL REAR TELEVISION CAMERA ASSEMBLY
  1. Engage the 2 claws to the vehicle body to temporarily install the rear television camera assembly.

  1. Install the rear television camera assembly with the 2 nuts.

    Torque:
    4.9 N*m{ 50 kgf*cm , 43 in.*lbf }

  1. Connect the connector.



2. INSTALL BACK DOOR TRIM COVER


    B297007
  1. Engage the 5 clips to install the back door trim cover.



3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    B297006
  1. Install the back door trim board assembly with the 10 clips.