Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR

OCCUPANT DETECTION SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)
  1. Temporarily install the separate type front seat cushion cover.



    B296372E01
  1. Using hog ring pliers, install 18 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the separate type front seat cushion pad.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B294118E01
  1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the separate type front seat cushion pad.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:
Use the same procedure as for the driver seat .



3. CONNECT FRONT SEAT AIRBAG ASSEMBLY

HINT:
Use the same procedure as for the driver seat .



4. CONNECT SEPARATE TYPE FRONT SEAT BACK COVER

HINT:
Use the same procedure as for the driver seat .



5. INSTALL FRONT SEAT CUSHION SHIELD

HINT:
Use the same procedure as for the driver seat .



6. INSTALL RECLINING ADJUSTER RELEASE HANDLE

HINT:
Use the same procedure as for the driver seat .



7. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    B309596E01
  1. Install the front seat inner belt assembly with the nut.
    Text in Illustration 
    *1
    Protruding Part

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor parts of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

  1. Engage the clamp.

  1. Engage each clamp under the front seat assembly.



8. INSTALL FRONT SEAT INNER CUSHION SHIELD
  1. Engage the 2 claws and 5 guides to install the front seat inner cushion shield.



9. INSTALL FRONT SEAT ASSEMBLY

HINT:
Use the same procedure as for the driver seat (Click here).