Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR

OCCUPANT DETECTION SENSOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT INNER BELT ASSEMBLY
(Click here)


2. REMOVE RECLINING ADJUSTER RELEASE HANDLE

HINT:
Use the same procedure as for the driver seat.
w/ Removable Headrest:
w/ Non-removable Headrest:



3. REMOVE FRONT SEAT CUSHION SHIELD

HINT:
Use the same procedure as for the driver seat.
w/ Removable Headrest:
w/ Non-removable Headrest:



4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

HINT:
Use the same procedure as for the driver seat.
w/ Removable Headrest:
w/ Non-removable Headrest:



5. SEPARATE FRONT SEAT AIRBAG ASSEMBLY

HINT:
Use the same procedure as for the driver seat.
w/ Removable Headrest:
w/ Non-removable Headrest:



6. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:
Use the same procedure as for the driver seat.
w/ Removable Headrest:
w/ Non-removable Headrest:



7. REMOVE OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    B294117
  1. Remove the 2 hog rings.



    B296371
  1. Remove the 18 hog rings and the occupant detection sensor (separate type front seat cushion pad) from the separate type front seat cushion cover.