Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › EGR VALVE

EGR VALVE > INSPECTION

for Preparation Click here



1. INSPECT EGR VALVE ASSEMBLY


    A215671E04
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    5 (+B1) - 4 (EGR1)
    20°C (68°F)
    18 to 22 Ω
    5 (+B1) - 6 (EGR3)
    20°C (68°F)
    18 to 22 Ω
    2 (+B2) - 1 (EGR4)
    20°C (68°F)
    18 to 22 Ω
    2 (+B2) - 3 (EGR2)
    20°C (68°F)
    18 to 22 Ω

    If the result is not as specified, replace the EGR valve assembly.