VACUUM SENSOR > INSTALLATION |
| 1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR |
Install the manifold absolute pressure sensor with the bolt.
Connect the connector.
| 2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY |
Install the air cleaner case sub-assembly with the 2 bolts and grommet.
Install the air cleaner filter element sub-assembly.
| 3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Install the air cleaner hose sub-assembly and lock the hose clamp.
| *a | Engine Side |
| *b | 75° |
Install the air cleaner cap sub-assembly with the 2 clamps.
Connect the wire harness clamp.
Connect the mass air flow meter connector.
Connect the purge VSV.
Connect the ventilation hose.