HEADLIGHT LEVELING SWITCH > REMOVAL |
| 1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY |
| 2. REMOVE NO. 1 SWITCH HOLE BASE |
for LHD:
![]() |
Disengage the 4 claws and 2 clips as shown in the illustration.
Disconnect each connector and remove the No. 1 switch hole base.
for RHD:
![]() |
Disengage the 2 claws and 3 clips.
Disconnect each connector and remove the No. 1 switch hole base.
| 3. REMOVE HEADLIGHT LEVELING SWITCH |
![]() |
Disengage the 2 claws and remove the headlight leveling switch from the No. 1 switch hole base.