Home
›
Vehicle Interior
›
DOOR LOCK
›
WIRELESS DOOR LOCK BUZZER
WIRELESS DOOR LOCK BUZZER > INSTALLATION
for Preparation
Click here
HINT:
Use the same procedure for the LHD and RHD vehicles.
The following procedure is for the LHD vehicles.
1. INSTALL WIRELESS DOOR LOCK BUZZER
Engage the clamp to install the wireless door lock buzzer.
Connect the connector.
2. INSTALL FRONT FENDER LINER LH
HINT:
Use the same procedure for the LH side and RH side .
3. INSTALL FRONT WHEEL LH
Torque:
103 N*m{ 1050 kgf*cm , 76 ft.*lbf }