WIRELESS DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Wireless Door Lock.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Wireless Control | ON | Function that turns wireless door lock | OFF or ON | Main body ECU (Multiplex network body ECU) |
| Hazard Answer Back | ON | When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice. | OFF or ON | Main body ECU (Multiplex network body ECU) |
| Open Door Warning | ON | The buzzer sounds when lock is pressed when any of the doors are ajar. | OFF or ON | Main body ECU (Multiplex network body ECU) |
| Auto Lock Time | 30 s | Function that regulates the interval between unlocking and automatic relocking of doors | 30 s, 60 s or 120 s | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Resp | ON | Wireless door lock buzzer response | OFF or ON | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Vol | Level 5*1 Level 7*2 | Wireless door lock buzzer volume | Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level0 | Main body ECU (Multiplex network body ECU) |