Home › Vehicle Exterior › VEHICLE PROXIMITY NOTIFICATION SYSTEM › VEHICLE PROXIMITY NOTIFICATION SYSTEM

VEHICLE PROXIMITY NOTIFICATION SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE VEHICLE PROXIMITY NOTIFICATION SYSTEM

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:
The following items can be customized.

  1. Customizing with the GTS

    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Utility / Customize Setting / Others.

    5. Select the setting by referring to the table below.

      Vehicle Proximity Notification System 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Proximity Sound Volume Adjustment
      Standard
      Function that sets the warning sound volume in 3 levels
      Standard, Standard +1, Standard +2
      Vehicle Approaching Speaker Controller
      Proximity Sound Level Increase (Vehicle Starting)
      ON
      Function that amplifies the warning sound when the vehicle starts off
      ON or OFF
      Vehicle Approaching Speaker Controller
      Proximity Sound Control (Vehicle Stationary)
      OFF
      Function that sets the warning sound when the vehicle is stopped
      ON or OFF
      Vehicle Approaching Speaker Controller