AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE AIR CONDITIONING SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Air Conditioner / Utility / Customize.
Select the setting by referring to the table below.
| Tester Display | Default | Content | Setting | Relevant ECU |
| Set Temperature Shift | Normal | Function to perform control with the shifted temperature versus the displayed temperature | -2C, -1C, Normal, +1C, +2C | Air Conditioning Amplifier Assembly |
| Air Inlet Mode | Automatic | In case of turning the A/C on to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode | Automatic or Manual | Air Conditioning Amplifier Assembly |
| Foot/DEF Auto Mode | ON | Function to turn the airflow from FOOT/DEF on automatically when AUTO MODE is on | ON or OFF | Air Conditioning Amplifier Assembly |
| Foot/DEF Automatic Blow Up Function | ON | Function to increase the blower level automatically when the defroster is on | ON or OFF | Air Conditioning Amplifier Assembly |
| Ambient Temperature Shift | Normal | Function to display shifted ambient temperature versus actual ambient temperature | -3C, -2C, -1C, Normal, +1C, +2C, +3C | Air Conditioning Amplifier Assembly |
| ECO MODE Cancel | OFF | Function to cancel the ECO mode drive when item is on | OFF or ON | Air conditioning amplifier assembly |
| Noise and Vibration Reduction | OFF | Function to change speed of the compressor when item is on | OFF or ON | Air conditioning amplifier assembly |
| Refrigerant Shortage Check | ON | Function to cancel the refrigerant shortage check (check performed during normal operation) when item is off | ON or OFF | Air Conditioning Amplifier Assembly |
| Fan speed increment control | Normal | Function to define how fast the AC blower goes to target speed when first activating the AC | Slow, Normal, Fast | Air Conditioning Amplifier Assembly |