UPPER INSTRUMENT PANEL > REASSEMBLY |
| 1. INSTALL NO. 5 INSTRUMENT PANEL CUSHION |
![]() |
Align the marking lines on the upper instrument panel with the ends of a new No. 5 instrument panel cushion and install the No. 5 instrument panel cushion as shown in the illustration.
| *1 | Marking Line |
| 2. INSTALL INSTRUMENT PANEL CUSHION |
Align the marking lines on the upper instrument panel with the ends of a new instrument panel cushion and install the instrument panel cushion as shown in the illustration.

| *1 | Marking Line | - | - |
Align the marking lines on the upper instrument panel with the ends of the instrument panel cushion and install a new instrument panel cushion as shown in the illustration.

| *1 | Marking Line | - | - |
| 3. INSTALL NO. 2 INSTRUMENT PANEL CUSHION |
![]() |
Using hot-melt glue, install a new No. 2 instrument panel cushion.
| 4. INSTALL NO. 1 INSTRUMENT PANEL CUSHION |
Using hot-melt glue, install 4 new No. 1 instrument panel cushions.

| 5. INSTALL FINISH PANEL MOUNTING BRACKET |
![]() |
Install the finish panel mounting bracket with the 2 screws <B>.
| 6. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
Engage the 3 hooks.
Push the instrument panel passenger airbag assembly to engage the 3 hooks.
Install the 2 screws to install the instrument panel passenger airbag assembly.
Engage the clamp to the upper instrument panel assembly.
| 7. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Install the No. 2 side defroster nozzle duct to the No. 2 heater to register duct with the 3 screws <B>.
| 8. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Install the No. 1 side defroster nozzle duct to the No. 1 heater to register duct with the 3 screws <B>.
| 9. INSTALL NO. 2 HEATER TO REGISTER DUCT ASSEMBLY |
![]() |
Install the No. 2 heater to register duct assembly with the 3 screws <B>.
| 10. INSTALL NO. 1 HEATER TO REGISTER DUCT ASSEMBLY |
![]() |
Install the No. 1 heater to register duct assembly with the 3 screws <B>.
| 11. INSTALL NO. 2 SIDE DEFROSTER NOZZLE |
![]() |
Engage the 4 claws to install the No. 2 side defroster nozzle.
| 12. INSTALL NO. 1 SIDE DEFROSTER NOZZLE |
![]() |
Engage the 4 claws to install the No. 1 side defroster nozzle.
| 13. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD) |
![]() |
Engage the 3 clips to install the No. 1 instrument panel register assembly.
| 14. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD) |
![]() |
Engage the 3 clips to install the No. 2 instrument panel register assembly.