FRONT CONSOLE BOX > DISASSEMBLY |
| 1. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY |
![]() |
Remove the 2 screws.
![]() |
Disengage the 9 claws and remove the console compartment door sub-assembly as shown in the illustration.
| 2. REMOVE CONSOLE BOX HOLE COVER |
![]() |
Using a screwdriver, disengage the 4 claws and remove the 2 console box hole covers.
| *1 | Protective Tape |
| 3. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
![]() |
Remove the 5 screws.
![]() |
Disengage the 7 claws and remove the rear console end panel sub-assembly.
| 4. REMOVE UPPER NO. 1 BOX PLATE |
![]() |
Disengage the 8 claws.
![]() |
Pull the upper No. 1 box plate in the direction indicated by the arrow to disengage the 4 guides and remove the upper No. 1 box plate.
| 5. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY |
Remove the 2 screws and console compartment door lock sub-assembly.
| 6. REMOVE CONSOLE COMPARTMENT DOOR CUSHION |
![]() |
Using needle-nose pliers, disengage the 2 clips and remove the 2 console compartment door cushions.
| *1 | Protective Tape |