Home › Engine / Hybrid System › 1NZ-FXE LUBRICATION › OIL PUMP

OIL PUMP > INSTALLATION > Preparation



SST 
I000397
09213-58012
Crankshaft Pulley Holding Tool


I000585
(91111-50845)
Bolt


I000032
09330-00021
Companion Flange Holding Tool


I000685
09550-60010
Differential Side Bearing
Replacer

I002315
(09951-00250)
Replacer 25


I002328
(09951-00380)
Replacer 38


I002358
(09952-06010)
Adapter


I002307
09950-70010
Handle Set




EQUIPMENT
Wooden block
-
Protective tape
-
Oil pressure gauge
-
Torque wrench
-
Feeler gauge
-


LUBRICANT / Standard Oil Grade
Oil Grade
Oil Viscosity (SAE)
API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving" or ILSAC multigrade engine oil 0W-20 5W-20 5W-30 10W-30
API grade SL, SM or SN multigrade engine oil 15W-40 20W-50

LUBRICANT / Standard Capacity
Item
Standard Condition
Drain and refill with oil filter change
3.7 liters (3.9 US qts, 3.3 Imp. qts)
Drain and refill without oil filter change
3.4 liters (3.6 US qts, 3.0 Imp. qts)
Dry fill
4.1 liters (4.3 US qts, 3.6 Imp. qts)


RECOMMENDED TOOLS
I001883
09010-3C110
Set, Hexagon Socket Wrench


-
I102190
(09013-6C120)
Socket Hexagon
8mm

-
I102194
09012-2C520
Deep Socket Wrench
24mm

-
I107015
09080-1C110
Toyota Electrical Tester Set


-
I107018
09080-2C100
Test Lead Set


-


SSM
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-
Toyota Genuine Seal Packing Block, Three Bond 1207B or equivalent
-