Home › Vehicle Exterior › BODY DIMENSIONS › UNDER BODY REFERENCE VALUES
BM3210E _01 Vehicle Exterior _050453 BODY DIMENSIONS _0242311 UNDER BODY REFERENCE VALUES F

BODY DIMENSIONS  UNDER BODY REFERENCE VALUES  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Measure points with the engine under cover no. 1, engine under cover no. 2, engine under rear cover and front floor cover removed.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front Body Mounting Reinforcement Standard Hole φ18 (0.71)
B, b Front Side Member Standard Hole φ18 (0.71)
C, c Front Suspension Crossmember Installation Bolt M14 (0.55)
D, d Front Suspension Crossmember Installation Bolt M14 (0.55)
E, e Front Side Inner Rear Member Standard Hole φ18 (0.71)

K131727C01
3.188,8.042 3.5,8.198 0.313,0.156 10 false *a 0.167,8.594 0.479,8.75 0.313,0.156 10 false *b
*a Distance between points other than those above *b mm
(in.)