Home › Vehicle Exterior › BODY WELD POINT › FRONT SIDE MEMBER
BM3210E _01 Vehicle Exterior _050433 BODY WELD POINT _0251814 FRONT SIDE MEMBER F

BODY WELD POINT  FRONT SIDE MEMBER  ASSEMBLY REPLACEMENT  


K131449

With the front fender apron assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points

a.

Remove the A.

K131509N01
2.323,1.917 2.75,1.5 2.75,1.5 2.917,1.5 false 2.938,1.417 3.094,1.615 0.156,0.198 10 false A


b.

Remove the front side member sub-assembly.

K131510C01
2.938,3.083 3.167,3.417 3.167,3.417 3.333,3.417 false 3.354,3.333 3.667,3.49 0.313,0.156 10 false *1
*1 FRONT SIDE MEMBER SUB-ASSEMBLY - -


K131511



INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108823

Plug Weld

a.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


b.

Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.


c.

Remove A from the new parts.

K131512C01
2.333,1.833 2.5,1.833 2.5,1.833 2.823,1.417 false 3.927,1.833 4.333,1.417 4.333,1.417 4.5,1.417 false 2.188,1.75 2.5,1.906 0.313,0.156 10 false *1 4.521,1.333 4.677,1.531 0.156,0.198 10 false A
*1 FRONT SIDE MEMBER SUB-ASSEMBLY - -



d.

Weld the front side member sub-assembly to the vehicle side.

K131513C01
3.333,3.5 3.167,3.5 3.167,3.5 2.917,3.094 false 3.354,3.417 3.667,3.573 0.313,0.156 10 false *1
*1 FRONT SIDE MEMBER SUB-ASSEMBLY - -


K131514


e.

Weld the A to the vehicle side.

K131515N01
2.24,1.844 2.667,1.417 2.667,1.417 2.833,1.417 false 2.865,1.333 3.021,1.531 0.156,0.198 10 false A


f.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


g.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.