Home › Vehicle Exterior › BODY WELD POINT › QUARTER WHEEL HOUSING OUTER PANEL
BM3210E _01 Vehicle Exterior _050433 BODY WELD POINT _0251824 QUARTER WHEEL HOUSING OUTER PANEL F

BODY WELD POINT  QUARTER WHEEL HOUSING OUTER PANEL  ASSEMBLY REPLACEMENT  


K131462

With the quarter panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K131564C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -



b.

Remove the A.

HINT:

B indicates weld to remove for easier removal.


K131563C01
2.083,3.25 1.917,3.25 1.917,3.25 1.75,2.698 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 2.104,3.167 2.26,3.365 0.156,0.198 10 false A
*A LH - -



c.

Remove the quarter wheel house reinforcement inner.

K131576C01
3.115,2.573 3.667,3.583 3.667,3.583 3.833,3.583 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 3.854,3.5 4.167,3.656 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



d.

After removing the A, remove the quarter wheel house panel outer.

K131577C01
0.667,1.5 0.833,1.5 0.833,1.5 1.396,1.979 false 0.333,2.083 0.5,2.083 0.5,2.083 0.948,2.5 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 0.188,2 0.5,2.156 0.313,0.156 10 false *1 1.052,1.323 1.365,1.479 0.313,0.156 10 false *a 0.521,1.417 0.677,1.615 0.156,0.198 10 false A
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -
*a 65 mm (2.56 in.) - -



e.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K131583C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -


K131578C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -



f.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K131657C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



g.

Remove the A.

HINT:

B indicates weld to remove for easier removal.


K131656C01
1.667,3.333 1.833,3.333 1.833,3.333 2,2.708 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 1.521,3.25 1.677,3.406 0.156,0.156 10 false A
*A RH - -



h.

Remove the quarter wheel house reinforcement inner.

K131579C01
3.26,3.583 3.427,3.583 3.427,3.583 4.01,2.5 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 3.104,3.5 3.417,3.656 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



i.

After removing the A, remove the quarter wheel house panel outer.

K131580C01
2.281,2 2.667,1.667 2.667,1.667 2.833,1.667 false 2.75,2.583 3.083,2.25 3.083,2.25 3.25,2.25 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 3.271,2.167 3.583,2.323 0.313,0.156 10 false *1 2.458,1.354 2.771,1.51 0.313,0.156 10 false *a 2.854,1.583 3.01,1.781 0.156,0.198 10 false A
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -
*a 65 mm (2.56 in.) - -



j.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K131588C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -


K131581C02
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -




INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld
K108835

Assembly Mark

a.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K131582C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -



b.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Apply a light coat of adhesive around the plug welding points.

·

Apply enough adhesive to the panels.



K131583C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -



c.

Weld the quarter wheel house panel outer to the vehicle side.

K131584C01
1.167,1.417 1.333,1.417 1.333,1.417 1.594,1.833 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 1.021,1.333 1.333,1.49 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -



d.

Weld the A to the vehicle side.

K131585C01
0.833,1.75 1,1.75 1,1.75 1.375,2 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 0.688,1.667 0.844,1.865 0.156,0.198 10 false A
*A LH - -



e.

Weld the quarter wheel house reinforcement inner to the vehicle side.

K131586C01
3.125,2.542 3.667,3.583 3.667,3.583 3.833,3.583 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 3.854,3.5 4.167,3.656 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



f.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:

Apply enough adhesive to the panels.


K131564C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -



g.

Weld the A to the vehicle side.

K131565C01
1.729,2.719 2,3.333 2,3.333 2.167,3.333 false 2.188,3.25 2.5,3.406 0.313,0.156 10 false A 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -



h.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K131587C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -



i.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Apply a light coat of adhesive around the plug welding points.

·

Apply enough adhesive to the panels.



K131588C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



j.

Weld the quarter wheel house panel outer to the vehicle side.

K131589C01
2.375,1.802 2.667,1.5 2.667,1.5 2.833,1.5 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 2.854,1.417 3.167,1.573 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -



k.

Weld the A to the vehicle side.

K131590C01
2.292,2 2.667,1.75 2.667,1.75 2.833,1.75 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 2.865,1.667 3.021,1.865 0.156,0.198 10 false A
*A RH - -



l.

Weld the quarter wheel house reinforcement inner to the vehicle side.

K131591C01
3.25,3.583 3.417,3.583 3.417,3.583 4.01,2.5 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 3.104,3.5 3.417,3.656 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



m.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:

Apply enough adhesive to the panels.


K131657C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



n.

Weld the A to the vehicle side.

K131658C01
1.667,3.25 1.833,3.25 1.833,3.25 2,2.729 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 1.521,3.167 1.677,3.365 0.156,0.198 10 false A
*A RH - -



o.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


p.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.