Home › Vehicle Exterior › BODY WELD POINT › QUARTER PANEL EXTENSION
BM3210E _01 Vehicle Exterior _050433 BODY WELD POINT _0251826 QUARTER PANEL EXTENSION F

BODY WELD POINT  QUARTER PANEL EXTENSION  ASSEMBLY REPLACEMENT  


K131464

With the back door opening trough assembly removed.


REMOVAL


Symbol Meaning
K108819

Remove Weld Points
K108820

Remove Weld Points

K131597


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K131598C01
0.667,1.917 0.833,1.917 0.833,1.917 1.125,1.604 false 0.583,1.25 0.75,1.25 0.75,1.25 1.26,1.427 false 0.521,1.833 0.833,1.99 0.313,0.156 10 false *1 0.438,1.167 0.75,1.323 0.313,0.156 10 false *2
*1 QUARTER PANEL EXTENSION REAR *2 BACK DOOR SIDE STOPPER RETAINER



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.