Home › Vehicle Exterior › BODY WELD POINT › BACK DOOR OPENING SIDE REINFORCEMENT
BM3210E _01 Vehicle Exterior _050433 BODY WELD POINT _0251827 BACK DOOR OPENING SIDE REINFORCEMENT F

BODY WELD POINT  BACK DOOR OPENING SIDE REINFORCEMENT  ASSEMBLY REPLACEMENT  


K131465

With the back door opening trough assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points

K131599


INSTALLATION


Symbol Meaning
K108823

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K131600C01
2.583,2.833 2.75,3.167 2.75,3.167 2.917,3.167 false 2.938,3.083 3.25,3.24 0.313,0.156 10 false *1
*1 ROOF SIDE REINFORCEMENT INNER - -



c.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.